Aodelan Wtr2 User Manual Page

Time between the start of one shot and the next. Number of Exposures: Number of shots ($0$-99 or infinite). Audible Beeper: Toggles sound on/off during countdowns. 6. How to Use: Shooting Modes A. Simple Wireless Shutter Release Set the camera to single-shot mode. Press the shutter button on the transmitter. Half-press: Focuses. Full-press: Shoots. B. Wired Mode (Without Transmitter) The receiver (

Disclaimer: This article is for informational purposes. Always refer to the physical, authorized manual provided with your device.

When you purchase the AODELAN WTR-2, you will receive:

: Manually control exposure length; press once to open and once to close. 2S (2-Second Delay) : Triggers the shutter after a two-second countdown. Timer Mode Settings : Set a self-timer before the program starts. LONG (Exposure) aodelan wtr2 user manual

Plug the 2.5mm end of the shutter cable into the receiver. Plug the other end into your camera’s remote control terminal (ensure you have the correct cable model for your specific camera brand). Power On: Turn on both devices. 4. Channel Pairing

Programming a timelapse requires a specific sequence of settings. Press the arrow keys to highlight DELAY . Set Delay: Press SET , adjust the countdown time, press SET . Set Interval: Move to INTVL , choose the time between shots. Set Quantity: Move to N , select the total number of frames. Start Sequence: Press the TIMER START/STOP button to begin. Troubleshooting Common Issues Quick fixes for the most common user operational errors. Remote Will Not Trigger Camera Check if the camera is set to manual focus.

The Aodelan WTR-2 is a versatile camera accessory designed for time-lapse photography, long exposures, and wireless shutter control. It functions as both a wireless timer remote control and a wired intervalometer system. This guide provides comprehensive instructions to help you set up and master your device. 📦 What is Included in the Box Time between the start of one shot and the next

- 12.1 Warranty Period (typically 12-24 months) - 12.2 Contacting AODELAN Support - 12.3 Cable Replacement Information

Repeats the programmed timer sequence automatically. How to Program a Timelapse

Sets the time between successive shots. Together with LONG and N, this is the core setting for time‑lapse sequences. Press the shutter button on the transmitter

The WTR2 works up to 60 meters (196 feet) . You don't need a line of sight, as the 2.4GHz signal passes through most obstacles. Troubleshooting Common Issues

Transmitter (130 x 46 x 22 mm); Receiver (85 x 37 x 31 mm)