Ensure you have all screws, bolts, wooden dowels, and the Allen wrench .
Stand the headboard assembly upright. Connect the back rail to the headboard posts using the medium-length bolts and barrel nuts. Next, align the front stationary rail with the two front crib posts. Insert the bolts from the outside of the posts into the metal inserts embedded in the rails. Ensure the finished, smooth sides of the wood face inward toward the sleeping area. Step 3: Install the Spring Mattress Support
Loosen the long bolt by one turn. The barrel nut needs slack to find the bolt. Push the nut in at a slight angle, then straighten. Ensure you have all screws, bolts, wooden dowels,
Align the with the corresponding mounting holes on the left side of the headboard.
If you are missing a piece, contact the manufacturer directly, as they often have the best, most up-to-date hardware kits. Next, align the front stationary rail with the
Thread the long bolt through the headboard and into the side rail. Tighten only halfway—leaving things a bit loose makes it easier to align the other parts. Repeat for the second side rail. Step 2: Connect the Footboard
Even with a better guide, you might run into a small issue. Here are the most common problems and their solutions. Step 3: Install the Spring Mattress Support Loosen
Two long wooden or metal support bars that run along the lower front and back to anchor the structure.
Lay the large flat on a soft surface (like a rug) to prevent scratching. Locate the hardware meant for attaching the side rails to the headboard.
Unpack everything and check for damage. Lay out the headboard, footboard, side rails, and mattress support.
: If you are missing bolts, contact the manufacturer or find certified replacement parts. Do not use random hardware store screws. Required Tools and Hardware Inventory