The Convo CVFS1 inverter, now part of the Bosch Rexroth family, is a capable and reliable drive for small-power applications. Whether you are installing it, performing maintenance, or troubleshooting an issue, the user manual is the first and most important resource you should consult.
To ensure safe operation and optimal performance, it is highly recommended to refer to the original documentation from Shenzhen Kangwo Electrical Technology Co. (the manufacturer of Convo drives).
(Note: If the above link changes due to website updates, go to convocn.com → Support → Download Center → Search “CVFS1 Series User Manual”.) convo inverter cvfs1 manual link
: Use the green button to start and the red button to stop. This is the factory default. Terminal Control : External switches can be wired to control the unit. Returning to Main Menu
The CVF-S1 series operates primarily on single-phase power and uses a digital keypad for configuration. Key parameters for setup include: Parameter Default/Range Running command source (0: Panel, 1: Terminal) F0.03 Frequency setting source (Potentiometer, Buttons, Analog) F0.04 Maximum input frequency (Highest allowed output) 50.0Hz (Range 50.0–999Hz) F0.05 Frequency upper limit ⚠️ Safety & Installation Notes The Convo CVFS1 inverter, now part of the
: Ensure the installation environment is well-ventilated and derate the inverter by 10% if operating at altitudes above 1,500 meters. Wiring Restriction
"It’s a deep dive, Sarah. Look at this." (the manufacturer of Convo drives)
The most direct way to access the user manual is through the following online resources. These sources contain the complete documentation for the CVF-S1 series.
Program to match motor nameplate (typically 50.00 or 60.00 ). Acceleration Profile Time 10.0 s
: Multi-function digital input 2. The factory default setting is Reverse Run (REV) (Parameter F2.14).
Click.