The manual outlines both vertical and horizontal spindles, both utilizing an ISO 40 (SK40) taper with a standard S20 buttress thread. 18 Geared Speeds:
The exact sequence for shifting gears (always ensure the spindle has come to a complete stop).
Before operating or servicing your machine, always verify your specific sub-model (e.g., standard FP2, FP2 LB, or late-model square-dial versions). The standard operational specifications found in the manual include: Specification (Standard FP2) 400 mm (15.7 inches) Vertical Travel (Y-axis) 400 mm (15.7 inches) Cross Travel (Z-axis / Ram) 200 mm (7.8 inches) Spindle Taper Forty (40) Taper (SK40 / DIN 2080) Spindle Speeds 18 speeds ranging from 40 to 2000 RPM Feed Rates 18 feeds ranging from 8 to 400 mm/min Motor Power Typically 2.2 kW / 3 HP (Two-speed motor) 3. Controls and Operator Interface
First, the bad news. Deckel (now part of DMG MORI) stopped supporting these machines decades ago. The original manuals were printed on paper that is now turning to dust. Unlike Bridgeport manuals (which are everywhere), the FP2 documentation is rare. deckel fp2 manual
For anyone owning, operating, or restoring this classic piece of machinery, having the original is not just helpful—it is essential for proper operation, routine maintenance, and safety.
A: No. The FP1 is a smaller, lighter duty machine (450kg vs 1100kg). The gear change logic is similar, but the part numbers, lubrication quantities, and spindle preload torques are completely different. Do not use an FP1 manual for an FP2.
These cover the later CNC versions equipped with Dialog or Siemens 3M controls and are significantly different from manual machine guides. Where to Find Manuals The manual outlines both vertical and horizontal spindles,
Welcome to the club.
Allows you to select one of the 18 geometric steps between 40 and 2000 RPM. Note: Speed changes must only be performed when the motor is fully stopped.
Finding an original paper copy is rare and expensive, but the machinist community has kept the digital versions alive: Practical Machinist Forum: The standard operational specifications found in the manual
The manual details the adjustable mechanical slip-clutch built into the feed drive shaft. This safety mechanism disengages power feed if a table crash occurs or if the cutting force exceeds safe parameters, protecting the delicate internal gears. 4. Crucial Maintenance and Lubrication Instructions
The Deckel FP2 features robust mechanical clamping levers for the X, Y, and Z slides. Always lock the axes that are not actively feeding during a heavy cut. This eliminates deflection and vastly improves surface finish.
The Deckel FP2 is widely regarded as one of the finest versatile milling machines ever manufactured. Built with legendary German engineering, these machines remain highly sought after by toolmakers, prototype engineers, and high-end hobbyists. However, to operate, service, or restore this mechanical masterpiece safely and accurately, having a comprehensive is non-negotiable.
Over decades of use, mechanical components naturally wear. The technical manual outlines how to recalibrate the machine to factory tolerances. Gibb Adjustments