Huawei Flash Tools Idt 2.0 Extra Quality Jun 2026

The tool will begin pushing down the partition images. You will see a progress tracking bar fill up as the system files deploy. Do not touch, move, or disconnect the device during this period.

[ Disconnect Battery ] ➔ [ Short Test Point to Shielding ] ➔ [ Insert USB Cable ] Power off the target Huawei or Honor device. Remove the back cover carefully to expose the motherboard.

Once the device is detected as COM 1.0, you can proceed with the flashing process. Step 1: Configure the Tool Right-click IDT.exe and select .

: With a click of the "Start" button, a progress bar began to crawl across the screen. This was the "flashing" process, where IDT 2.0 etched new firmware directly into the device's non-volatile flash memory. The Success

IDT 2.0 installs a foundational factory image designed to restore basic life to the phone. To make the device usable for daily operations, you must complete the final recovery phase:

These packages contain raw image files ( .img or .bin ) along with a critical mapping configuration file, typically named flash.xml or burntable.xml . Step 1: Entering Huawei USB COM 1.0 Mode (Testpoint)

Cause: The loaded XML or Board Software files do not precisely match the hardware revision or Kirin chipset variant of your phone.

1. Device Not Recognized / Tool Hanging at "Waiting for Device"

You cannot use standard OTA or dload firmware. You must download the specific Huawei Board Software matching your device model. This firmware contains the required .xml mapping file and raw image files. Step-by-Step Guide: How to Use Huawei Flash Tools IDT 2.0 Step 1: Install the Drivers and Disable Driver Signature

Locate the two specific on your device's motherboard layout (you will need to search for a hardware diagram specific to your phone model to find these).

Locate the specific dots for your phone model (you will need to search for a schematic diagram unique to your device model). Step 3: Boot into HUAWEI USB COM 1.0 Mode