Mikuni Bs26 Carburetor Manual Verified Link Instant
Carb Body Flange Surface (Gasket Off) ------------------------------------- | | <-- Measure 17.0mm | [=== Float Body ===] Reassembly Safety Points
The Mikuni BS26 carburetor features a range of jetting options to suit various engine applications. The following jetting guide provides a general starting point for tuning:
Push the small pin retaining the float hinge out with a needle or punch. Lift the float out along with the dangling needle valve.
The metal cap houses a soft rubber diaphragm attached to the vacuum slide. Engine vacuum draws air through an offset hole in the bottom of the slide, pulling the slide upward against the return spring. 2. The Fuel Metering System mikuni bs26 carburetor manual verified
Provides a richer mixture for cold starts. Verified Tuning Specifications
0% Throttle 25% Throttle 50% Throttle 100% Throttle │ │ │ │ ▼ ▼ ▼ ▼ [ Pilot Screw ] ─── [ Pilot Jet ] │ ▼ [ Needle Jet / Clip ] ──────────────────── [ Main Jet ] Adjusting the Pilot Fuel Screw
The Mikuni BS26 carburetor is a vacuum-controlled, slide-type carburetor designed for use on motorcycles, ATVs, and small engines. It features a 26mm throttle bore and is capable of delivering a wide range of fuel flow rates to suit various engine applications. The metal cap houses a soft rubber diaphragm
Per the Suzuki GS500 Service Manual , section 4-7:
5D-series (Clip typically non-adjustable on stock EPA models)
A common starting point is 1.5 to 1.75 turns out from a lightly seated position. The Fuel Metering System Provides a richer mixture
The Mikuni BS26 carburetor is a popular and widely used carburetor model in the motorcycle and small engine industries. Known for its reliability, performance, and ease of use, the BS26 has become a favorite among enthusiasts and professionals alike. In this in-depth blog post, we'll provide a verified manual for the Mikuni BS26 carburetor, covering its components, specifications, and troubleshooting procedures.
Usually set between 1.5 to 2.0 turns out from lightly seated. Turning clockwise decreases air intake for a richer mixture; counterclockwise increases airflow for a leaner mixture.