Nalco 3dt 449 Msds New |work|

Soak up liquid spills with an inert absorbent material (e.g., sand, silica gel, acid binder, universal binder).

Thermal degradation produces hazardous oxides. Byproducts: Phosphorus oxides and carbon oxides may form. Fighter Protection Wear self-contained breathing apparatus (SCBA). Use full protective chemical gear. Section 6: Accidental Release Measures Personal Precautions Evacuate unnecessary personnel from area. Wear appropriate personal protective equipment. Ensure adequate ventilation in spill zone. Environmental Safeguards Prevent runoff into drains or waterways. Dike large spills with absorbent material. Clean-Up Methods Neutralize carefully with basic material like lime. Soak up residue with inert absorbent. Scoop waste into marked plastic containers. Section 7: Handling and Storage Safe Handling Avoid contact with eyes and skin. Do not breathe vapors or mists. Wash thoroughly after handling the chemical. Storage Conditions Keep in original corrosion-resistant container. Store in a cool, dry place. Keep container tightly closed when idle. Store away from strong bases. Section 8: Exposure Controls and Personal Protection Exposure Limits Phosphoric Acid PEL: 1 mg/m³ (TWA) Phosphoric Acid STEL: 3 mg/m³ Engineering Controls Use local exhaust ventilation systems. Ensure eyewash stations are nearby. Provide safety showers near work areas. Personal Protective Equipment (PPE) Eye Protection: Chemical splash goggles or face shield. Hand Protection: Nitrile, neoprene, or PVC gloves. nalco 3dt 449 msds new

: Inhibits scale buildup and equipment corrosion. Soak up liquid spills with an inert absorbent material (e

| Mode | UN Number | Proper Shipping Name | Packing Group | | :--- | :--- | :--- | :--- | | Road/Rail | UN3265 | Corrosive liquid, acidic, organic, n.o.s. | II | | Sea (IMDG) | UN3265 | Same | II | | Air (IATA) | UN3265 | Forbidden on passenger aircraft | II | Wear appropriate personal protective equipment

The label on the container often contains a QR code or web address for immediate access to the current SDS.

All components comply with the TSCA Inventory.

Remove contaminated clothing instantly. Flush skin with plenty of water for at least 15 minutes. Wash clothing before reuse. If irritation persists, seek medical attention.