6933 Software Update Work — Satlink Ws

Open the upgrade program. You will need to select the correct that your computer has assigned to the USB cable (you can check this in your Windows Device Manager).

: Necessary USB drivers installed on your computer so the meter can be recognized by the software. Step-by-Step Update Process

: A fully charged Satlink WS 6933 unit and a reliable USB-to-mini-USB data cable. Avoid using loose cables that could drop connection mid-transfer.

: A valid file containing either the master system firmware (typically a .bin extension) or an updated TP configuration file. 💻 Step 1: Getting the Computer to Recognize the Device satlink ws 6933 software update work

The ".bin" firmware file and the "Upgrade.exe" program (usually provided by Satlink Brazil or official support sites).

The SATLINK WS 6933 software update process involves several key steps:

Check the physical serial number label located on the rear casing or beneath the battery panel. Hardware Generation Serial Number Prefix Required Firmware Version SW6933-2019 or older Firmware V1.9 (or stable V7.1 / V8.1 variants) Modern Generation SW6933-2021 and newer Firmware V2.1 onwards Method 1: PC Software Upgrade via RS-232 / USB Port Open the upgrade program

until the progress bar reaches 100% and a success message appears. : Restart the meter normally and navigate to System Setup in the menu to check that the software version has updated. Key Benefits of Updating Updated TP Lists

: Navigate to System Setup in the device menu; the first line displays the current hardware serial number and software version.

A: Not directly. You need Windows via Boot Camp or a VirtualBox with USB passthrough. The driver is Windows-only. Step-by-Step Update Process : A fully charged Satlink

Adds new frequencies and deletes retired ones.

If you only need to update the transponder (TP) list, the process is similar but uses a different file: Open the upgrade tool.

: Use the manufacturer’s specified update software on your PC. You may need to select the specific .bin file you downloaded and follow the on-screen prompts to "Update" or "Upgrade".