. While there is no single official global "portal" for downloads, updates are typically provided by regional manufacturers or through dedicated satellite tool software. Preparation & Requirements
Wait for the "Upgrade Success" popup window before unplugging. Managing the Transponder (TP) List
To download the software update file, follow these steps:
A computer running Windows (Windows 7, 10, or 11). Most satellite meter upgrade tools are compiled specifically for Windows environments. satlink ws6933 software update portable
| Feature | Specification | |---|---| | | 2.1" TFT Positive Transflective LCD (240x320 pixels) | | Frequency Range | 950 ~ 2150 MHz | | Input Level | -65 ~ -25 dBm | | LNB Supply | 13V/18V, up to 300mA | | Battery | 7.4V / 800mAh Li-Ion | | Portability | Dimensions: 8x16x4 cm, Weight: 0.25kg | | Update Method | USB Port (USB to RS-232) |
Click the or Start button to begin the transmission. Watch the progress bar move from 0% to 100%.
: Use the Satlink channel editor software to import updated .xml or .ini transponder lists matching your region (e.g., Ku-band or C-band targets), then upload them via the same USB interface. Troubleshooting Common Errors Root Cause "Target Connect Error" Driver mismatch or bad cable Change USB ports; reinstall the USB-to-Serial driver. Stuck at 0% Device not in update mode Turn meter off and on again while plugged into the PC. White Screen Bootloop Corrupted or wrong firmware file Reflash using a verified older stock firmware version. Managing the Transponder (TP) List To download the
Download the zip archive containing the upgrade tool and firmware. Create a dedicated folder on your computer desktop. Extract all archive contents into this folder.
Ensure the battery is charged to at least 70% to prevent the device from powering off mid-update.
Open the folder and execute the setup file (e.g., CH341SER.EXE ). Watch the progress bar move from 0% to 100%
Ensure the device was completely powered off before clicking start.
Before starting the update, ensure you have the following ready: Satlink WS-6933 device and the mini-USB to USB cable provided in the box : Ensure the device has at least a 50% charge