Simco Fmx002 Manual Top Patched [2025-2027]

: Before each measurement, the sensor should be turned toward an uncharged area and the ZERO button pressed to reset the reading. 3. Interface and Display Features

Sensor reads zero even on a known charged plastic.

Bar graph (red for positive, blue for negative polarity) and digital readout. Operating Instructions 1. Powering On and Zero Calibration simco fmx002 manual top

Engineered with conductive ABS resin to ensure the shell doesn't retain personal charges that skew measurements.

. It utilizes a non-contact measuring method and features a physical design meant to be easily grounded through its conductive plastic casing and ground snap. device.report Primary Measurement Range: (low range) and (high range). Ion Balance Mode: Capable of measuring offset voltages up to when used with the attachable metal plate. Target Distance: ), guided by a specialized dual LED ring system. Power Source: alkaline battery. 2. Top Interface and Button Layout The user interface on the top of the : Before each measurement, the sensor should be

| Symbol / Reading | Meaning | |----------------|---------| | ± 0.00 kV | Current field voltage (kV = kilovolts) | | LO BAT | Low battery – Replace the 9V battery. | | HOLD | Measurement is frozen on screen. | | ION | Ionizer balance test mode (if equipped / optional). |

Press the button. The digital display should read 0.00 . 3. Taking a Measurement Aim the sensor toward the target surface. Bar graph (red for positive, blue for negative

Understanding how to operate, calibrate, and maintain this device ensures accurate readings and extends its operational lifespan. Technical Specifications and Overview

A: The FMX-002 does not have a physical trimpot on the top. Zero is done electronically via the long-press of the center button.

Press the gray button. The digital display must read 0.00 . Step 3: Align the Measuring Distance (The 1-Inch Rule)


Moorhuhn - Winter Edition VERSION DATUM 27.02.2010 DLs 15282x	5.15 MB	DOWNLOAD VON GG24.CH