Sinotimer Tm630s Manual New! -

Press the small button using a paperclip. This clears any factory testing data and prepares the memory. 2. Setting the Current Time and Day Hold down the Clock button throughout this entire process.

Check your wiring terminals. Verify that you have run a line/live wire out of Terminal 3 to the load, and a neutral wire out of Terminal 4 to the load. Ensure the input voltage matches the device specifications. The programs run at the wrong times

The switch forces the relay permanently open. Connected devices stay OFF. sinotimer tm630s manual

is an robust tool for automation when programmed correctly. By following this manual—setting the current time, creating ON/OFF programs, and setting the mode to "AUTO"—you can effectively manage your electrical devices, saving time and energy.

The button allows you to temporarily override your program or test your wiring. Press the small button using a paperclip

to select the day combination (e.g., every day, weekdays only, or specific days). to set the exact start time. again. You will see "1 OFF". Set the stop time using the same method. to exit and save. 4. Manual Override button (often red) to cycle between modes: The load is permanently powered. The device follows your programmed schedule. The load is permanently disconnected. Wiring & Installation Sinotimer TM630S wiring diagram usually involves four terminals: Terminals 1 & 2: Power Input (Main Supply). Terminals 3 & 4: Load Output (Connect to the appliance).

💡 To clear a specific program without resetting the entire timer, navigate to that program using the P button and press the C/R button. Understanding the Manual Override Button Setting the Current Time and Day Hold down

Since specific manufacturer manuals for these imported digital time switches can be sparse, this guide compiles the standard operating procedures for the TM630S module, which is widely used for industrial control, street lighting, and appliance automation.

Press the MANUAL button until the screen displays AUTO ON or AUTO OFF .

SINOTIMER TM630S is a professional-grade digital programmable timer switch designed for heavy-duty applications. Unlike standard household timers, the supports a massive and offers precise 1-second interval programming