By following this guide and utilizing the correct Nokia TA-1174 SPD flash file, you can successfully bypass security locks, fix software bugs, and restore your feature phone to factory-fresh working condition. Share public link

Go to the flash tool settings and lower the baud rate speed, then attempt the flashing sequence again.

Data Loss; flashing will erase all personal data from the device.

Once the tool displays "Passed" or "Finish," unplug the cable and power on the phone. Troubleshooting Common Issues

Follow these steps precisely to flash the stock firmware onto your Nokia TA-1174. Step 1: Install the SPD USB Drivers

Browse to your extracted Nokia TA-1174 firmware folder, select the .pac file, and click . Wait a few seconds for the tool to fully load the software package. Click the Play button (Start Downloading) icon.

Download and extract the SPD USB driver package onto your PC.

To flash the Nokia TA-1174 SPD flash file, you will need to use a flashing tool, such as the SPD Flash Tool. Here are the steps to follow:

Click on the located in the top-left corner of the software interface.

Your computer lacks proper driver signatures. Re-install the SPD USB Drivers, try a alternative USB port (preferably USB 2.0 rear ports on desktops), or swap your Micro-USB cable.

Click the or Write Flash button inside your flashing application to launch the partition write sequence.

, which are widely cited as tested and stable versions. These files are usually in SPD USB Drivers : You must install Spreadtrum USB Drivers

The (Nokia 105 2019) utilizes a Spreadtrum (SPD) chipset, specifically the SC6531EFM . Flashing this device is primarily done to resolve software issues like "Hang on Logo," "Contact Service" errors, or to remove forgotten security codes. Technical Specifications Chipset: Spreadtrum SC6531EFM. Firmware Format: Typically available as .bin or .pac files.